Kleenpak Nova capsules are designed for use in medium-to-large-scale production environments (100 L to > 1000 L), and are often selected by the end user following scaling studies using smaller, Kleenpak capsule formats.Kleenpak Nova capsules can be offered with 'In-line' (NP) or 'T' style (NT) inlet/outlet configurations with sanitary flange or hose barb fittings.With the AB-style filter cartridge at their core, Kleenpak Nova filter capsules can be supplied with the most comprehensive range of filter media among all of 颇尔's single-use capsules.
特色及优点
- All-polypropylene construction
- High-capacity filter media for long-life
- Fixed pore, non-shedding for consistent performance
- Low binding for maximum transmission of proteins
- Low extractables for premium product quality
- Broad chemical compatibilities for use in a wide range of applications
- Available in T-style or in-line formats for flexibilty of use
- Staubli vent valve allows for simplicity of connection to integrity test devices
- Resistant to repeat autoclave cycles
- Variable inlet and outlet connection configurations to accept variable tubing dimensions
- Quality and Bio-Safety Biological Tests
- Meets USP Biological Reactivity Test in vivo for Class VI-121 °C Plastics
Effluent Quality Tests*
- Meets Cleanliness per USP Particulates in Injectables
- Non-Fiber-Releasing Non-Pyrogenic per USP
- Bacterial Endotoxins (< 0.25 EU/mL)
-
Meets Total Organic Carbon and Water Conductivity per USP Purified Water, pH per USP Sterile Purified Water
* Per lot sample soak or rinse-up flush aliquots
材料成分
Filter Membrane | 聚丙烯 |
Support/Drainage | 聚丙烯 |
Core/End Caps | 聚丙烯 |
Cage | 聚丙烯 |
O 型圈 | 聚丙烯 |
Sealing Technology | Thermal bonding without adhesives |
Housing Bowl | 聚丙烯 |
Housing Head ¹ | 聚丙烯 |
Operating Conditions
Maximum Operating Temperature | 40 °C |
最大操作压力 |
3 barg (43.5 psig) at 40 °C in liquids1 0.5 barg for continuous gas service applications2 |
2 In case the pressure may exceed 0.5 barg (7 psig) during operation, a safety shield is required to protect operators and equipment in case of an accident.However, the maximum pressure of 3 barg (43.5 psig) must not be exceeded at any time
Removal Ratings
Media Code | Liquid Absolute Rating | Liquid Retention (90%) |
J006 | 0.6 µm ³ | < 1.0 µm ³ |
J012 | 1.2 µm | < 1.0 µm ³ |
J025 | 2.5 µm | < 1.0 µm ³ |
J045 | 4.5 µm | 1.2 微米 |
J060 | 6.0 µm | 3.0 微米 |
J100 | 10.0 µm | 5.4 µm |
J200 | 20.0 微米 | 10.0 µm |
J400 | 40.0 微米 | 22.0 µm |
Nominal Dimensions
In-Line (P-style) | NP5L ³ | NP6 | NP7 | NP8 |
Maximum diameter including valves |
154 mm (6.1 in.) |
154 mm (6.1 in.) |
154 mm (6.1 in.) |
154 mm (6.1 in.) |
Length with hose barb inlet/outlet |
275 mm (10.8 in.) |
397 mm (15.6 in.) |
644 mm (25.4 in.) |
895 mm (35.2 in.) |
Length with sanitary inlet/outlet |
213 (8.4 in.) |
335 mm (13.2 in.) |
584 mm (23.0 in.) |
834 mm (32.8 in.) |
T-style | NT6 | NT7 | NT8 |
Maximum diameter including valves | 240 mm (9.5 in.) | 240 mm (9.5 in.) | 240 mm (9.5 in.) |
Length | 349 mm (13.7 in.) | 598 mm (23.5 in.) | 848 mm (33.4 in.) |
Sterilization 4
Autoclave (Maximum) | 1 x 60 minutes at 135 °C |
Gamma irradiation | Maximum dosage 50 kGy |
Typical Liquid Flow Rates
Please contact us for liquid flow rates.
注意事项:NP5L filter size configuration available with filter media grades J012 and J045 only