Pure Polypropylene Membrane for
Filtration of Aggressive Solvents
- Pure polypropylene gives high chemical stability
- Offers high temperature resistance and low extractable levels
- Inherently hydrophobic.
- Economical alternative to PTFE.
过滤介质
- Hydrophobic polypropylene
孔径
- 0.1 微米
Typical Thickness
- 89 μm (3.5 mils)
Typical Liquid Flow Rate - Isopropyl Alcohol
- 1.9 mL/min/cm2 at 0.7 bar (70 kPa, 10 psi)
Typical Air Flow Rate
- 0.8 L/min/cm2 at 0.7 bar (70 kPa, 10 psi)
Maximum Operating Temperature - Water
- 82 °C (180 °F)
Minimum Bubble Point - Isopropyl Alcohol
- 1.7 bar (170 kPa, 25 psi)
Sterilization
- Provided non-sterile.Autoclavable if desired.