pall,颇尔,PLI Single-Round In-Line Filter Housings,

PLI Single-Round In-Line Filter Housings


pall,颇尔,PLI Single-Round In-Line Filter Housings,
pall,颇尔,PLI Single-Round In-Line Filter Housings

<a href='' target='_blank'>颇尔</a> PLI 单筒内嵌式过滤器滤壳
PLI Single-Round In-line Filter Housings are designed for the filtration of gases or liquids in pharmaceutical production.The in-line design provides the optimal combination of low hold-up volume and minimal pressure drop.These single-round housings are ideal for the filtration of fluids found in the fermentation or purification steps of pharmaceutical processes and are designed to accept filter cartridges from 5 inches (127 mm) to 30 inches (1016 mm) in size.

颇尔's P-Series filter housings are specified to meet the requirements of the pharmaceutical industry and offer a sanitary design suitable for use in many applications in biotech, vaccine or plasma fractionation processes.P-Series filter housings are available in two surface finish options:
  • Surface finish ‘Code 1’ meets the requirements of sanitary product-wetted applications in pharmaceutical processing
  • Surface finish ‘Code 3’ is ideal for filtration in utilities.


  • Meets pharmaceutical industry demands for design, quality and documentation:ideal for all applications from utilities to aseptic processing
  • Compatible with a large variety of Code 7 or Code 2 filter cartridges:offering full flexibility in the choice of best filtration solution
  • Top-in bottom out design:provides the ideal fluid path and minimal hold-up volume for liquid filtration
  • All necessary documentation available for qualification in pharmaceutical processes:ensures ease of integration and qualification of 颇尔 housings in new or existing pharmaceutical production lines
  • CE marked to European Pressure Directive 97/23/EC (if applicable) and ATEX Directive 94/9/EC (Group II Category 2):ideal for use in a large variety of process conditions with hazardous and non-hazardous fluids
  • Many variants pre-manufactured and held on stock with full documentation:reduces lead times for the most common housing models
  • Electronic drawing files readily available for incorporation into process schematics:saves hours of design time and reduces error rate on design drawings
  • Supported by 颇尔 field service engineers worldwide:benefit from the accumulated knowledge of more than 60 years’ experience in filtration
Operating Pressure Range -1 to 10 bar g / -14.5* to 150 psi g
操作温度范围 -10°C (14°F) / 150°C (300°F) **
材料成分 AISI 316L stainless steel (Wetted Parts)
AISI Nitronic 60 (Clamp)
Seal materials comply with FDA requirements for food contact use and conform to USP class VI – 121 °C
Steam Sterilization Up to 150 °C (300 °F)
Surface Finish See Ordering Information
Inspection Documentation Test report type 2.2 to EN10204
(Test report type 3.1 to EN10204 available on request)
* Full vacuum
** With compatible fluids which do not soften, swell or adversely affect the materials of construction


Part Number Cartridge Height Housing Height Bowl Removal
PLI105G23LDD1H4 5 inch 305 mm (12.0 in.) 180 mm (7.1 in.)
PLI11G23LDD1H4 10 inch 430 mm (16.9 in.) 300 mm (11.8 in.)
PLI12G23LDD1H4 20 inch 690 mm (27.2 in.) 550 mm (21.7 in.)
PLI13G23LDD1H4 30 inch 950 mm (37.2 in.) 800 mm (31.5 in.)
Example Part Number 描述
PLID105G23LDD1H4 PLI Filter Housing
Supplied with fully traceable documentation
5 inch cartridge height
1.5 inch clamp coupling (BS4825) on inlet/outlet
0.5 inch clamp coupling for vent
0.5 inch clamp coupling for drain
Surface finish electropolished to Ra 0.385/0.8 µm (15/32 µin)
Silicone (peroxide cured) gasket
* This is a guide to typical standard configurations only.For availability of optional configurations, please consult the detailed part numbering structure guide below.

Code 项目
PLI PLI Filter Housing
(Leave Blank)
Supplied with Certificate Of Conformance only
Supplied with fully traceable documentation package
5 inch cartridge height
10 inch cartridge height
20 inch cartridge height
30 inch cartridge height
23L 1.5 inch clamp coupling (BS4825) on inlet/outlet
0.5 inch clamp coupling for vent
Quick-release valve

0.5 inch clamp coupling for drain
Quick-release valve
Hosetail valve
No drain
Surface finish electropolished to Ra 0.375/0.8 µm (15/32 µin)
Surface finish electropolished to Ra 0.8/1.2 µm (32/48 µin)
H4 Silicone (peroxide cured) gasket


pall,颇尔,PLI Single-Round In-Line Filter Housings
上一条pall,颇尔,PKP 层析系统(欧洲专用),
下一条pall,颇尔,PLT 滤壳,