Ultipor Nylon N6,6 Membranes
Ultipor Nylon 6,6 membranes are very resistant to mechanical, chemical and thermal stress.They can be used in either direction, are inherently hydrophilic, have high flow rates, low pressure drops and very low extractables.Where appropriate, they can be steam sterilized without change in flow or pore size characteristic.Ultipor Nylon 6,6 membranes are available in a wide range of pore sizes, and as supported and unsupported membranes.
N6,6 Posidyne Membranes
N6,6 Posidyne membranes possess all the benefits of the Ultipor N6,6 range, plus an important additional feature:Positive zeta potential in aqueous fluids.Many important contaminants, such as endotoxins, bacteria, viruses and colloidal silica are negatively charged, and the retention of these particles is therefore significantly improved with N6,6 Posidyne membranes.N6,6 Posidyne membranes are available in various pore sizes.
Major Advantages
- Safe retention of contaminants
- Inherently hydrophilic
- Excellent flow rates
- Lot-to-lot and within-lot consistency
- Excellent handling properties
- Mechanically robust
- Low extractables
- Compatible with a variety of sealing methods
- Passes USP Class VI-121° C plastic test for biosafety
- General filtration
- Laboratory filtration devices
尺寸
Master rolls:12.75”x500’
Packaging
Core:Cores are PVC 3.0” I.D.
Packaging:Shrink-wrap around outside of each roll.
化学兼容性
酸
|
醇类
|
Aromatic Hydrocarbons
|
碱
|
酯类
|
Ethers
|
Glycols
|
卤代烃
|
酮类
|
其他
|
Oils
|
Sealing Method Compatibility
ABS
|
丙烯酸
|
EVA
|
Latex
|
Natural Rubber
|
Poly Carbonate
|
Polyester (PBT)
|
聚乙烯
|
聚丙烯
|
PVC
|
Silicone
|
Styrene
|
Synthetic Rubber
|
Urethane (thermoplastic)
|
Typical Membrane Characteristics
| 基材 | Pore Size (µm) | Thickness (mils) | Thickness (µm) |
| Supported nylon (hydrophilic) (LoProdyne® LP) | 0.2 | 5.5-7.0 | 139.7-177.8 |
| Supported nylon (hydrophilic) (LoProdyne LP) | 0.45 | 5.7-6.7 | 144.8-170.2 |
| Supported nylon (hydrophilic) (LoProdyne LP) | 1.2 | 5.0-7.5 | 127.0-190.5 |
Typical Performance Characteristics
| 基材 | Pore Size (µm) | Water Bubble Point (psi) | Water Bubble Point (bar) | Protein Binding (µg/cm2) | Delta P (inches Hg) | Delta P (bar) |
| Supported nylon (hydrophilic) (LoProdyne LP) | 0.2 | 51.0-56.0 | 3.52-3.86 | 不可用 | < 26.5 | < 0.89 |
| Supported nylon (hydrophilic) (LoProdyne LP) | 0.45 | 32.0-36.0 | 2.21-2.48 | 不可用 | < 8.0 | < 0.27 |
| Supported nylon (hydrophilic) (LoProdyne LP) | 1.2 | 13.8-16.2 | 0.95-1.12 | < 9.0 | < 4.2 | < 0.14 |
Typical Membrane Characteristics
| 基材 | Pore Size (µm) | Thickness (mils) | Thickness (µm) |
| Amphoteric support nylon (Ultipor®, Biodyne® A) | 0.2 | 5.5-7.0 | 139.7-177.8 |
| Amphoteric support nylon (Ultipor, Biodyne A) | 0.45 | 5.7-6.7 | 144.8-170.2 |
| Amphoteric support nylon (Ultipor, Biodyne A) | 0.65 | 5.6-6.4 | 142.2-162.6 |
| Amphoteric support nylon (Ultipor, Biodyne A) | 1.2 | 5.5-7.0 | 139.7-177.8 |
| Amphoteric support nylon (Ultipor, Biodyne A) | 3.0 | 11.0-12.5* | 279.4-317.5 |
| Amphoteric support nylon (Ultipor, Biodyne A) | 5.0 | 11.0-12.5* | 279.4-317.5 |
| Positively-charged supported nylon (Posidyne®, Biodyne B) | 0.2 | 11.0-13.0* | 279.4-330.2 |
| Positively-charged supported nylon (Posidyne, Biodyne B) | 0.45 | 5.7-6.7 | 144.8-170.2 |
| Positively-charged supported nylon (Posidyne, Biodyne B) | 0.8 | 5.5-7.0 | 139.7-177.8 |
| Positively-charged supported nylon (Posidyne, Biodyne B) | 1.2 | 11.0-12.5* | 279.4-317.5 |
| Positively-charged supported nylon (Posidyne, Biodyne B) | 3.0 | 11.0-12.5* | 279.4-317.5 |
| Positively-charged supported nylon (Posidyne, Biodyne B) | 5.0 | 11.0-12.5* | 279.4-317.5 |
*Dual layer measurement.
Typical Performance Characteristics
| 基材 | Pore Size (µm) | Water Bubble Point (psi) | Water Bubble Point (bar) | DNA Testing (pg) | Delta P (inches Hg) | Delta P (bar) |
| Amphoteric support nylon (Ultipor, Biodyne A) | 0.2 | 51.0-56.0 | 3.52-3.86 | < 10 | < 26.5 | < 0.90 |
| Amphoteric support nylon (Ultipor, Biodyne A) | 0.45 | 32.0-36.0 | 2.21-2.48 | < 10 | < 8.0 | < 0.27 |
| Amphoteric support nylon (Ultipor, Biodyne A) | 0.65 | 21.0-24.0 | 1.45-1.65 | 不可用 | 不可用 | 不可用 |
| Amphoteric support nylon (Ultipor, Biodyne A) | 1.2 | 13.8-16.2 | 0.95-1.12 | < 10 | < 4.2 | < 0.14 |
| Amphoteric support nylon (Ultipor, Biodyne A) | 3.0 | > 9.0 | > 0.62 | 不可用 | < 2.5 | < 0.08 |
| Amphoteric support nylon (Ultipor, Biodyne A) | 5.0 | > 5.0 | > 0.34 | 不可用 | < 1.5 | < 0.05 |
| Positively-charged supported nylon (Posidyne, Biodyne B) | 0.2 | 不可用 | 不可用 | 不可用 | < 25.0 | < 0.85 |
| Positively-charged supported nylon (Posidyne, Biodyne B) | 0.45 | 32.0-36.0 | 2.21-2.48 | < 10 | 不可用 | 不可用 |
| Positively-charged supported nylon (Posidyne, Biodyne B) | 0.8 | 17.5-21.0 | 1.21-1.45 | 不可用 | < 5.5 | < 0.19 |
| Positively-charged supported nylon (Posidyne, Biodyne B) | 1.2 | 13.0-15.0 KL5 | 0.90-1.03 | 不可用 | < 3.3 | < 0.11 |
| Positively-charged supported nylon (Posidyne, Biodyne B) | 3.0 | 9.0-11.0 KL5 | 0.62-0.76 | 不可用 | < 2.0 | < 0.07 |
| Positively-charged supported nylon (Posidyne, Biodyne B) | 5.0 | 5.0-7.0 KL5 | 0.34-0.48 | 不可用 | < 1.1 | < 0.04 |
The Biodyne, LoProdyne, Posidyne, and Ultipor names are registered trademarks of 颇尔 Corporation and are not available for use.Products in this datasheet may be covered by one or more patents including US 4,693,985; and US 4,886,836.
