pall,颇尔,Ultipor GF Plus 过滤器滤芯,

Ultipor GF Plus 过滤器滤芯


pall,颇尔,Ultipor GF Plus 过滤器滤芯,
pall,颇尔,Ultipor GF Plus 过滤器滤芯

Ultipor GF Plus 过滤器滤芯
颇尔 Ultipor GF Plus filter cartridges are made with positive Zeta modified glass fiber media for enhanced efficiency.The single open-ended (SOE) AB style cartridges feature a high-area pleated element construction designed to fit in sanitary style filter housings.A bio-safe low extractables binder resin covalently immobilizes the glass fibers and imparts a strong positive charge in aqueous service.In addition to the high particulate removal efficiency and low pressure drops consistent with glass fiber media, the added positive Zeta charge enables Ultipor GF Plus filters to effectively remove submicron haze particles or endotoxins from a wide variety of aqueous biological and pharmaceutical solutions.

Pharma Quality for Highest Quality Requirements

Ultipor GF Plus filters are manufactured in accordance with ISO9000 and GMP requirements.Each filter is supplied with a certificate of test that confirms suitability for use in pharmaceutical applications.Samples are tested for effluent quality to meet the USP requirements regarding

  • Total Organic Carbon
  • pH shift
  • 内毒素

All components meet the specifications for biological tests listed in the USP for Class VI plastics at 121 °C.Each box contains a certificate which confirms the quality standards in manufacturing, the traceability of all components, and the above mentioned safety tests.


  • Positive Zeta enhances efficiency
  • High area pleated medium
  • High void-volume
  • Low differential pressures
  • Absolute particle-rated in liquids
  • High-capacity for long-life
  • Fixed pore structure prevents unloading
  • Melt-sealed construction
  • Broad chemical compatibility
  • Choice of AB (SOE) sanitary or (DOE) cartridge styles
  • Manufactured for use in conformance with cGMP
  • FDA-listed materials per 21 CFR
  • ISO 9000 Certified Quality System



 中等 Bonded glass fiber, positive zeta potential
 Support and Drainage Layers 聚酯
 Core, Cage and End Caps 聚丙烯 
 O-ring  Silicone 1


1 Other materials available on request


Removal Ratings (Liquid)2


1 µm, 2 µm, 6 µm, 10 µm*, 20 µm, 40 µm


2 > 99.98% by mod.OSU-F2 Beta test


Endotoxin Removal Efficiency3



 U010Z  100 %
 U2-20Z  99.97 %


Efficiency in deionized water with up to 55 – 70 mg E. coli 055-B5 endotoxin per 254mm (10 in.) modular element.


Latex Bead Removal Efficiency4


U010Z    99.99% for 0.29 µm beads to 2.8 gm
U2-20Z (20/2 µm)     99.99% for 0.8 µm beads to 22 gm


4 Efficiency in deionized water per 254 mm (10 in.) modular element


Nominal Dimensions


 Lengths  254 mm (10 in.), 508 mm (20 in.), 762 mm (30 in.), 1016 mm (40 in.)
 Diameter  70 mm (2.75 in.)



Typical Liquid Flow Rates5



Operating Conditions6


 Maximum Differential Pressure and Temperature 5.5 bard (80 psid) to 50 °C
3.8 bard (55 psid) to 82 °C


6 Using compatible fluids.


Autoclaving and Steaming in situ7



 Maximum Temperature to 140 °C




7 Contact 颇尔 for recommended procedures.


pall,颇尔,Ultipor GF Plus 过滤器滤芯
上一条pall,颇尔,配UltiporN66 膜的Kleenpak囊式过滤器,
下一条pall,颇尔,Tyvek♦ Sheets,