Ideal for Prefiltration of Difficult-to-Filter
Solutions and Serum
- Reduces clogging of final filters.Can be used upstream of a sterilizing filter for viscous solutions.
- Strong and flexible while both wet or dry.
- Excellent throughput with high liquid flow rates at low differential pressures.
- Designed to be used in applications requiring excellent retention properties combined with tensile strengths in excess of 200 bar (20,000 kPa, 3000 psi).
过滤介质
- Hydrophilic acrylic copolymer on a non-woven support
孔径
- 0.2, 0.45, 0.8, 1.2, 3, and 5 μm
Diameter
- 25 - 293 mm
Typical Thickness
- 94 μm (3.7 mils)
Typical Water Flow Rate
- mL/min/cm2 at 0.7 bar (70 kPa, 10 psi)
- 0.2 μm:16
- 0.45 μm:75
- 0.8 μm:142
- 1.2 μm:315
- 3 μm:518
- 5 μm:778
Maximum Operating Temperature - Water
- 88 °C (190 °F)
Minimum Bubble Point - Water
- 0.2 μm:2.0 bar (200 kPa, 30 psi)
- 0.45 μm:1.1 bar (110 kPa, 16 psi)
- 0.8 μm:0.6 bar (60 kPa, 8 psi)
- 1.2 μm:0.4 bar (40 kPa, 6 psi)
- 3 μm:0.2 bar (20 kPa, 3 psi)
- 5 μm:0.1 bar (10 kPa, 2 psi)
Biological Safety
- Passes United States Pharmacopeia (USP) Biological Reactivity Test, In Vivo <88>
Sterilization
- Provided non-sterile.If desired, sterilize by gamma irradiation or sanitize with 70% ethanol
