pall,颇尔,Fluorodyne EX EDF 膜式滤芯,AB05UEDF2PH4, AB1UEDF7PH4, AB2UEDF7PH4, AB3UEDF7PH4

产品名称:
Fluorodyne EX EDF 膜式滤芯
产品型号:
AB05UEDF2PH4, AB1UEDF7PH4, AB2UEDF7PH4, AB3UEDF7PH4
产品描述:

产品介绍

pall,颇尔,Fluorodyne EX EDF 膜式滤芯,AB05UEDF2PH4, AB1UEDF7PH4, AB2UEDF7PH4, AB3UEDF7PH4
pall,颇尔,Fluorodyne EX EDF 膜式滤芯

Fluorodyne EX EDF 膜式滤芯

Fluorodyne EX grade EDF filters are 0.2 micron rated high capacity, low protein binding sterilizing grade filters.Incorporating a built-in prefiltration layer and validated to retain B. diminuta at a challenge level of 107 cfu/ cm2 of membrane, Fluorodyne EX grade EDF filters are ideal for the sterile filtration of cell harvest material and challenging intermediate and final bulk biological process fluids.

颇尔's AB-style filters are replaceable cartridges used with stainless steel housing assemblies, suitable for medium-to-large-scale manufacturing operations (100 L to > 1000 L), supplied with -226 O-ring (颇尔 code 2 or code 7) fittings as standard.

AB-style filters with Fluorodyne EX grade EDF membrane feature a laid over pleat membrane construction and high effective filtration area (>1 m2 per 10” assembly) for outstanding throughput performance.

A validation package for Fluorodyne EX grade EDF filters supports the assurance of safety within your process.

Key Features and Benefits

  • Laid-over pleat filter construction allows for high flow rates and smaller filtration systems
  • Narrow core design for more area
  • Asymmetric built-in prefilter layer for higher dirt-holding capacity
  • Low protein and preservative binding
  • Low extractables
  • Designed for autoclaving or SIP under wet or dry conditions
  • 2D Matrix Marking for electronic traceability via barcode scanner

Quality Standards

  • All individual filter elements are integrity tested – test correlated to microbial retention
  • Manufactured for use in conformance with cGMP 
  • ISO 9000 Certified Quality System
  • Meets USP Biological Reactivity Test in vivo for Class VI-121 °C plastics
  • Every filter tested during manufacture
  • Certificate of Test provided includes
    • Fabrication Integrity 
    • Bacterial Retention
    • 材料成分
    • Effluent quality for cleanliness, TOC and water conductivity, pH and pyrogens

Products in this datasheet may be covered by one or more patents including :
EP 0 667 800
EP 0 982 061
EP 1 380 331
US 5,543,047
US 5,690,765
US 5,725,784
US 6,113,784
US 7,083,564
US 7,318,800

延伸阅读

  海报:Scale Up of Direct Flow Membrane Filters

  文章:Bacterial Penetration of 0.2 μm Sterilizing- Grade Filters with a Cholesterol Liposome Carrier:A Comparison of Data
 
 

材料成分

 
Filter Membrane Prefilter Layer:Hydrophilic asymmetric PES
Final Filter Layer: Hydrophilic PVDF
Support/Drainage 聚丙烯
Core/End Caps 聚丙烯
Cage Polypropylene with TiO2 whitener¹
O 型圈 Silicone elastomer
Sealing Technology Thermal bonding without adhesives
 
1 TiO2 is an insoluble inorganic mineral filler that does not contribute to organic extractables

Operating Parameters²

 
Maximum Differential Pressure (Forward Direction) 5.5 bar (80 psi) at 40 °C
4.0 bar (58 psi) at 80 °C
Maximum Differential Pressure (Reverse Direction) 2.0 bar (30 psi) at 40 °C
 
2 In compatible fluids which do not soften, swell or adversely affect the filter or its materials of construction

Sterilization

 
Autoclave 5 x 60 minutes at 135°C
In Situ Steam³ 5 x 60 minutes at 135°C
 
3 Maximum differential pressure 1 bar in forward direction

Typical Extractables in Water at 20 °C*

 
< 50 mg after 4 hours extraction (per 10 in. cartridge)
 
* Tested on elements without pre-flushing

Nominal Effective Filter Area (EFA)

 
1.1 m² per 254 mm cartridge (11.8 ft² per 10 in. cartridge)
0.53 m² per 125 mm cartridge (5.7 ft² per 5 in. cartridge)
 


Integrity Test Values (Air test gas, water wet)**

 
Values for 10 in. cartridge at 20°C  
Max. allowable Forward Flow (air test gas) Water wet 30 mL/min at 2760 mbar (40 psi)
 
** Contact 颇尔 for multi-element integrity test values and recommended test procedures

Flow Rates

 
Contact 颇尔 for details
 

 
项目 Part Number
Fluorodyne® EX Grade EDF Membrane Filter Cartridge
Nominal Length 127 mm (5 in.);颇尔 Code 2 double O-ring (silicone elastomer), bayonet lock and flat top end cap*
AB05UEDF2PH4
Fluorodyne® EX Grade EDF Membrane Filter Cartridge
Nominal Length 254 mm (10 in.);颇尔 Code 7 double O-ring (silicone elastomer), bayonet lock and fin*
AB1UEDF7PH4
Fluorodyne® EX Grade EDF Membrane Filter Cartridge
Nominal Length 508 mm (20 in.);颇尔 Code 7 double O-ring (silicone elastomer), bayonet lock and fin*
AB2UEDF7PH4
Fluorodyne® EX Grade EDF Membrane Filter Cartridge
Nominal Length 762 mm (30 in.);颇尔 Code 7 double O-ring (silicone elastomer), bayonet lock and fin*
AB3UEDF7PH4
 
* Other adapter fittings and O-ring materials available on request

 


pall,颇尔,Fluorodyne EX EDF 膜式滤芯
上一条pall,颇尔,Fluorodyne II DFL Membrane in Junior Filter Cartridges (MCY and SBF Style),MCY1110DFLPH4, MCY2220DFLPH4, MCY4440DFLPH4, SBF1DFLPH4
下一条pall,颇尔,配 Fluorodyne EX EDF 膜的小型Kleenpak20囊式过滤器,KM5EDFP2S

相关产品


访客留言

15900658720
18017322602