pall,颇尔,配 Poly-Fine XLD 系列过滤器的 Marksman 组件,

产品名称:
配 Poly-Fine XLD 系列过滤器的 Marksman 组件
产品型号:
产品描述:

产品介绍

pall,颇尔,配 Poly-Fine XLD 系列过滤器的 Marksman 组件,
pall,颇尔,配 Poly-Fine XLD 系列过滤器的 Marksman 组件

配 Poly-Fine XLD 系列过滤器的 Marksman 组件
Marksman Elements with Poly-Fine XLD Series Filters contain pleated polypropylene depth media in a wide diameter 152 mm (6 in.) cartridge with in-to-out flow.They offer high flow and long filter life.The unique push-in adapters enable direct replacement of bag filters into most commercially available bag housings to give reduced filter changeouts, improved filtrate quality and lower costs.

特色及优点

  • New, wide diameter cartridge geometry
  • Innovative combination of depth media and pleated cartridge technologies
  • High surface area, high-flow capacity
  • Excellent retention of deformable contaminants
  • Proprietary gel guard media
  • Absolute rated at > 99.9% efficiency with retention ratings from 1.5 to 90 µm
  • Directly fits into bag housings with no hardware changes
  • In-to-out flow traps contaminant inside the element
  • Quick, easy changeouts
  • All-polypropylene construction
  • Short length option to accommodate shorter baskets

Biological Tests

All components meet the specifications for biological safety as per the USP Biological Reactivity test, in vivo, for Class VI-121 °C Plastics (gaskets excluded).

FDA-listed Materials

  • All materials are FDA-listed for food contact, except Viton* A gaskets.

Purity

  • Cartridges are free of surfactants, resins, binders, and adhesives.

Rinse-Up

  • Rinse-up to 18 Megohm-cm with a minimum of throughput.

Sanitization

  • Cartridges may be sanitized in hot water, 77 – 82 °C (170 – 180 °F), for 20 minutes (recommended).

* Viton is a registered trademark of DuPont Dow (non-FDA materials).

 
 

材料成分

 

 
过滤介质  聚丙烯 
硬件 聚丙烯 
Support Material    聚丙烯 
Gaskets    Ethylene Propylene (EPDM), Viton* A, Buna N 
Sealing Thermal Bond
 
* Registered trademark of DuPont Dow (non-FDA material)

 

Nominal Dimensions

 

 
Outside Flange Diameter  184 mm (7.25 in.) (equal to Size 1 and Size 2 Bags) 
Outside Filter Diameter    152 mm (6 in.) 
Lengths    Size 1 Bag, Size 2 Bag 
Surface Area Size 1:Up to 0.93 m² (10 ft²)
Size 2:Up to 2.04 m² (22 ft²)
 

 

Flow Capacity

 

 
尺寸 最多       Recommended¹
189 L/min (50 gal/min) 95 L/min (25 gal/min)
2 379 L/min (100 gal/min) 189 L/min (50 gal/min)
 
¹ For maximum filter life

 

Performance Specifications

 

 
Filter Grades (> 99.9% Retention Rating by ASTM F-795 Test)  1.5, 3, 4.5, 10, 20, 30, 40, 70, 90 µm 
Maximum Forward Differential Pressure      

Polypropylene Cage:To 5.1 bard (75 psid) @ 20 °C (68 °F)
To 2.4 bard (35 psid) @ 54 °C (130 °F)

Stainless Steel Cage:To 1.7 bard (25 psid) @ 80 °C (175 °F)

Recommended Change Out Differential Pressure²  2.4 bard (35 psid)
 
² Provided that the maximum differential pressure is not exceeded, based on temperature limits defined above

 

注意事项:Stainless steel flange required for temperatures in excess of 43 °C (110 °F)

 

 
 

Liquid Flow Specifications

 

 

 

Psid per 3.8 L/min (1 gal/min) –  Water @ 20 °C (68 °F)

Psid per 3.8 L/min (1 gal/min) –  Water @ 20 °C (68 °F)

Psid per 3.8 L/min (1 gal/min) – Water @ 20 °C (68 °F) Fluid with 40 cPs viscosity

Psid per 3.8 L/min (1 gal/min) – Water @ 20 °C (68 °F) Fluid with 40 cPs viscosity

过滤器等级 

Size 1 

Size 2 

 Size 1

 Size 2

1.5

0.051

0.026

1.200

0.600

3

0.020

0.010

0.400

0.200

4.5

0.013

0.007

0.400

0.200

10

0.009

0.005

0.310

0.160

20

0.006

0.003

0.240

0.120

30

0.006

0.003

0.180

0.090

40

0.006

0.003

0.150

0.080

70

0.006

0.003 

0.026

0.013

90

0.006

0.003

0.026

0.013

 
注意事项:For mbar values, multiply psid by 69

 


pall,颇尔,配 Poly-Fine XLD 系列过滤器的 Marksman 组件
上一条pall,颇尔,MDS Junior 工业滤壳,MDS4463GN4MFH4, MDS4463GN8MFH4
下一条pall,颇尔,采用 Poly-Fine II 系列过滤器的 Marksman 组件,

相关产品


访客留言

15900658720
18017322602