All-Polypropylene-Graded Density
Prefilters Extend Final Filter Life
- All-polypropylene components provide superior chemical compatibility and low levels of extractables
- Melt-blown media and thermally bonded construction protect purity and integrity of filtered solutions
- High dirt-holding capacity improves throughput and extends the life of your final filters, especially when working with viscous solutions
- Listed as acceptable for food contact according to the Code of Federal Regulations, Title 21
- Provides excellent flow rates
- Excellent flow rates make capsules ideal for prefiltration of biologicals, serum-based products, beverages, plating solutions, ink, syrup, water, and a wide range of solvents
- Ideal in situations where rapid filtration or short processing times are essential
- Broad chemical compatibility of capsules makes general clarification of fluids easy
- Can be used for compressed air and gas filtration
材料成分
- Filter Media:Graded-density non-woven polypropylene
- Housing, Vent Plug and Filter Support:聚丙烯
- Sealing Technology:Thermal bonding
有效过滤面积
- 1500 cm2
Housing Length
- 22.9 cm (9.0 in.)
Inlet/Outlet Connection
- 12.7 mm (1/2 in.) straight hose barb
Housing Diameter
- 6.9 cm (2.7 in.)
Typical Water Flow Rate
- 24.0 L/min/0.1 bar (10 kPa) (16.7 L/min/psi)
最大操作压力
- 4.1 bar (410 kPa, 60 psi) at ambient temperature
Maximum Operating Temperature
- 82 °C (180 °F) at 0.7 bar (70 kPa, 10 psi)
Biological Safety
- Passes United States Pharmacopeia (USP) Biological Reactivity Test, In Vivo <88>
Sterilization
- Autoclave 121 °C (250 ºF) at 1 bar (10 kPa, 15 psi) for 20 min.