特色及优点
- Corrosion resistant 316 L Stainless steel jacket for temperature control
- In-Line or T-Type flow designs
- Entire housing electropolished
- Internal surfaces with ≤ 0.4 µm (≤ 15 µin.)Ra surface finish
- External surfaces with ≤ 0.8 µm (≤ 32 µin.)Ra surface finish
- Low hold-up volume — maximizes product recovery
- Easy-draining features, including downward sloping internal contour and low-point drain — allows easy removal of CIP solution or product
- Fewer welds — results in an extremely sanitary design
- Automated orbital welding — produces consistent high quality welds
- Non-rotating vent and drain — prevent twisted hoses and allow hard piping
- Manufactured for use in conformance with cGMP
- 3-A Sanitary Standard Symbol for optimized CIP/cleanable design
- Manufacturing Quality System Certified to ISO 9000 Standards
材料成分
滤壳 | 316L Stainless Steel |
Design Pressure and Temperature | 10 barg at 140 °C (150 psig at 284 °F); Jacket:4.9 barg at 140 °C (72 psig at 284 °F) |
Nominal Diameter | 114.5 mm (4 ½ in.) |
Number of Cartridges | 1 |
Cartridge Style | AB Code 7 |
Inlet and Outlet Connections | 1½ in. Sanitary coupling; Jacket: ½ in.NPT |
Standard Gasket O-ring Material | Ethylene Propylene |
Legs and Support | ALT:Stand available; ALI:无 |
Closure Style | Vee-band clamp |
Flow Configuration | ALT:Tee; ALI: In-Line |
Operating Conditions
最大操作压力 | -1¹ to 10 barg (-14.5¹ to 150² psig) |
Maximum Operating Temperature | 150 °C (300 °F) |
² With compatible fluids, which do not soften, swell or adversely affect the gasket materials