Designed for Processing Volumes Up To 100 L
- Fluorodyne II membrane is a hydrophilic polyvinylidene fluoride (PVDF) that offers higher flow rates with low protein and preservative binding, and broad chemical and temperature resistance
- Suited for biological, pharmaceutical, and sterilizing filtration requirements
- Scalable
颇尔's UpScaleSM Program
From drug discovery and basic research, through process development and production, 颇尔 Corporation is the single source for all of your filtration and separation needs.Our UpScale program provides you with the scalable filtration products and support you need to bring new products to market faster.
UpScale direct flow filtration products inclue:Acrodisc® syringe filters, AcroPak capsules, and Kleenpak™ capsules.These products use the same membranes in larger or smaller effective filtration areas.
材料成分
- Filter Media：Fluorodyne II membrane (hydrophilic PVDF)
- Housing and Vent Plug:聚丙烯
- Sealing Methods:Thermal bonding
- Filling Bell:聚碳酸酯
孔径
- 0.1 and 0.2 μm
有效过滤面积
- PN 12478, 12472:400 cm2
- PN 12471, 12473:800 cm2
尺寸
- Housing Diameter:6.1 cm (2.4 in.)
-
Approximate Length With Filling Bell:
PN 12478, 12472:19 cm (7.5 in.)
PN 12471, 12473:22.5 cm (8.9 in.)
Inlet/Outlet Connections
- PN 12478, 12471:6.4 - 12.7 mm (1/4 - 1/2 in.) stepped hose barb with filling bell on outlet
- PN 12472, 12473:14 mm (9/16 in.) hose barb
Maximum Operating Temperature and Pressure
- 5.2 bar (520 kPa, 75 psi) at 40 °C (100 °F)
Maximum Differential Pressure
- 4.1 bar (410 kPa, 60 psi) at 40 °C (100 °F)
Recommended Integrity Test Minimum Bubble Point – Water
- 0.2 μm:3.2 bar (320 kPa, 46 psi)
- 60% IPA/40% H2O (v:v)
- 0.1 μm:1.8 bar (180 kPa, 26 psi)
Typical Water Flow Rate L/min at 0.1 bar (10 kPa) [L/min/psi]
- PN 12472:0.3 [0.2]
- PN 12478:0.5 [0.3]
- PN 12473:0.6 [0.4]
- PN 12471:0.9 [0.6]
Bacterial Retention
- Lot samples retain 107 cfu/cm2 of B. diminuta per modified ASTM F838, current revision.Additionally, 0.1 μm capsules have a typical TR of 108 for Acholeplasma laidlawii (mycoplasma).
Endotoxin Level
- < 0.25 EU/mL using Limulus Amoebocyte Lysate (LAL) test
Biological Safety
- Passes United States Pharmacopeia (USP) Biological Reactivity Test, In Vivo <88>
Sterilization
- Sterilized by gamma irradiation and individually packaged
