
50 mm Filters with Superior Performance
for Demanding Applications
- Reusable and autoclavable
- PTFE membrane and polypropylene housing have broad chemical resistance
- Large surface area provides greater throughput and high air flow rate
- Available with a variety of inlet and outlet connectors
- Venting bioreactors, fermentation tanks, and carboys
- Sterile gas purging of culture vessels
- Filtering aggressive solvents
材料成分
- Filter Media:PTFE on a polypropylene support
- Housing:聚丙烯
有效过滤面积
- 19.6 cm2
尺寸
- Overall Length:8.2 cm (3.2 in.)
- 直径:7.3 cm (2.9 in.)
Inlet/Outlet Connections
- Stepped hose barbs 6.4 - 12.7 mm (1/4 - 1/2 in.) diameter, 1/8 in.MNPT, 9.5 mm (3/8 in.) straight pipe
最大操作压力
- 4.1 bar (410 kPa, 60 psi) at ambient temperature
Recommended Integrity Test Minimum Bubble Point – Methanol
- 0.2 μm:0.9 bar (90 kPa, 13 psi)
- 0.45 μm:0.3 bar (34 kPa, 5 psi)
- 1 μm:0.2 bar (20 kPa, 3 psi)
Typical Air Flow Rates
- L/min at 0.2 bar (20 kPa, 3 psi)
- 0.2 μm:8
- 0.45 μm:12
- 1 μm:15
Biological Safety
- Passes United States Pharmacopeia (USP) Biological Reactivity Test, In Vivo <88>
Sterilization
- Provided non-sterile.All are individually packaged (except PN 4250).
- Can be sterilized by autoclaving at 121 - 123 °C (250 - 253 °F) for 20 min.Integrity should be verified after each autoclave cycle and before use
完整性检测套件
- Verifies device integrity using oneminute water breakthrough or bubble point tests
- Non-destructive test performed either in situ or in the lab
- For use with Acro 50 vent devices