Membranes Designed for the Stringent
Requirements of Mobile Phase Filtration
- Membranes are identical in composition and quality to those used in 颇尔’s HPLC-certified Acrodisc® syringe filters
- HPLC certification assures that the filters will not add artifacts to your analysis
- GH Polypro membrane is the best choice for filtering mobile phases
- PTFE membrane provides the ultimate in chemical compatibility for filtering harsh chemicals and HPLC mobile phases
- Purification and degassing of mobile phase solvents used in liquid chromatography applications
过滤介质
- GH Polypro (GHP, hydrophilic polypropylene), TF (PTFE, hydrophobic polytetrafluoroethylene), PVDF (hydrophilic polyvinylidene fluoride), and Nylaflo™ (hydrophilic nylon) membranes
孔径
- 0.2 and 0.45 μm
Typical Thickness
-
GHP 膜
- 0.2 μm:101 μm (4.0 mils)
- 0.45 μm:114 μm (4.5 mils)
-
TF (PTFE) Membrane
- 0.2 μm:139 μm (5.5 mils)
- 0.45 μm:135 μm (5.3 mils)
-
PVDF Membrane
- 0.2 μm:140 μm (5.5 mils)
- 0.45 μm:127 μm (5.0 mils)
- Nylaflo Membrane 0.2 and 0.45 μm:127 μm (5.0 mils)
Maximum Operating Temperature
- GHP Membrane:55 ºC (131 ºF)
- PVDF, TF (PTFE), and Nylaflo Membranes:100 ºC (212 ºF)
Minimum Bubble Point – Water
-
GHP 膜
- 0.2 μm:2.9 bar (290 kPa, 42 psi)
- 0.45 μm:1.38 bar (138 kPa, 20 psi)
-
PVDF Membrane
- 0.2 μm:2.3 bar (230 kPa, 34 psi)
- 0.45 μm:1.1 bar (110 kPa, 16 psi)
-
Nylaflo 膜
- 0.2 μm:3.4 bar (340 kPa, 49 psi)
- 0.45 μm:2.6 bar (260 kPa, 37 psi)
Minimum Bubble Point - IPA, TF (PTFE) Membrane
- 0.2 μm:1.0 bar (100 kPa, 15 psi)
- 0.45 μm:0.4 bar (40 kPa, 6 psi)
