High Quality Standards
- Each filter cartridge is supplied with a certificate of test
- Each filter cartridge has a traceable lot number
- Meets USP Biological Reactivity Test, in vivo, for Class VI-121 °C Plastics
- FDA-listed materials per 21 CFR
Key Features
- Broad chemical compatibility
- Very high flow rates
- Low extractables
- Tolerant of high operating temperatures
- ‘No cage’ option further reduces potential extractables
Compatibility at 20 °C¹
The Emflon FM filter cartridge was specifically designed for improved compatibility and optimized economics in polishing a broad array of challenging solvents, including:- 乙酸，冰
- Acetone
- 乙腈
- Dimethylacetamide (DMAC)
- Dimethylformamide (DMF)
- Dimethylsulfoxide (DMSO)
- 乙醇
- 乙酸乙酯
- 己烷
- Hydrochloric mAcid 38%
- Isopropyl Alcohol (IPA)
- 甲醇
- 二氯甲烷
- 甲基异丁基甲酮 (MIBK)
- Methyl Tertiary Butyl Ether (MTBE)
- n Heptane
- Pyridine
- Sodium Hydroxide, 50%
- Tetrahydrofuran (THF)
- 甲苯
- 水
- Xylene
This partial list is provided for general guidance only.
¹ Because so many factors (eg elevated temperatures) can affect the chemical resistance of a given product, you should pre-test under your own operating conditions observing applicable safety practices such as those given in the Material Safety Data Sheet for each chemical.颇尔 Corporation can provide specific compatibility guidance, testing and data upon request.
材料成分
| 膜 | PTFE (hydrophobic) |
| Support and Drainage Layers | 聚丙烯 |
| Core, Cage and Endcaps | 聚丙烯 |
Operating Parameters
| Max Differential Pressure (Δp) |
4.1 bar (60 psi) @ 23°C (73°F) 2.1 bar (31 psi) @ 60°C (140°F) |
| Max Operating Temperature | 95°C (203°F) at 1.0 bar (14 psi) Δp |
Extractables*
| 水 | < 5mg |
| Acetone | 90 mg |
| 乙酸乙酯 | 240 mg |
| 二氯甲烷 | 600 mg |
| 甲苯 | 515 mg |
Filter Area (Per 254 mm module)
| Typical Effective Filtration Area | 0.58m² (6.2ft²) |
Removal Ratings**
| 颗粒尺寸 | Beta Ratio (Efficiency) |
| 0.6 微米 | 100 (99.0%) |
| 1 微米 | 2000 (99.2%) |
| 2 微米 | 5000 (99.98%) |
| 3 微米 | >5000 (99.98%) |
| 4 微米 | >5000 (99.98%) |
| >5 微米 | >5000 (99.98%) |
**As determined by a modified OSU-F2 test
Typical initial clean media ∆P 10 in. (254 mm) element; water at 20 °C (68 °F); viscosity 1 cP.For assistance in filter assembly, sizing and housing selection, contact 上海羽令.
