pall,颇尔,PRC 预装层析柱,预装 MEP、HEA 和 PPA HyperCel 混合机制层析介质,PRC05X050MEPHCEL01, PRC05X050HEAHCEL01, PRC05X050PPAHCEL01, PRC08X100MEPHCEL01, PRC08X100HEAHCEL01, PRC08X100PPAHCEL01

产品名称:
PRC 预装层析柱,预装 MEP、HEA 和 PPA HyperCel 混合机制层析介质
产品型号:
PRC05X050MEPHCEL01, PRC05X050HEAHCEL01, PRC05X050PPAHCEL01, PRC08X100MEPHCEL01, PRC08X100HEAHCEL01, PRC08X100PPAHCEL01
产品描述:

产品介绍

pall,颇尔,PRC 预装层析柱,预装 MEP、HEA 和 PPA HyperCel 混合机制层析介质,PRC05X050MEPHCEL01, PRC05X050HEAHCEL01, PRC05X050PPAHCEL01, PRC08X100MEPHCEL01, PRC08X100HEAHCEL01, PRC08X100PPAHCEL01
pall,颇尔,PRC 预装层析柱,预装 MEP、HEA 和 PPA HyperCel 混合机制层析介质

PRC 预装<a href='http://pall.net.cn/' target='_blank'>层析柱</a>,预装 MEP、HEA 和 PPA HyperCel 混合机制层析介质
Rapid selectivity screening of MEP, HEA, and PPA HyperCel mixed-mode sorbents
  • Convenient – Ready-to-use 1 mL and 5 mL prepacked columns.
  • Easy to use – Direct connection to commonly-used laboratory chromatography systems such as ÄKTA* systems.
  • Efficient – High packing efficiency (> 2,500 plates/meter).
  • Consistent – Screen 颇尔 mixed-mode chromatography sorbents under reliable and reproducible conditions, and guarantee performance run after run.

Mixed-mode Chromatography Sorbents for Antibody Capture and “No Salt” Hydrophobic Interaction

MEP, HEA and PPA HyperCel sorbents exploit unique selectivities of robust synthetic ligands to capture proteins or separate them from contaminants.They provide a unique separation mechanism different from conventional methods.All ligands operate predominantly by hydrophobic interaction.This “HIC-like” interaction typically takes place without the addition of lyotropic salt.

*ÄKTA is a trademark of GE Healthcare companies.
 
 
1 毫升 PRC 柱的快速筛选和条件优化可快速选择合适的化学成分。一旦在 1 毫升 PRC 柱上选择了化学成分,使用条件就可以在 5 mL PRC 柱中得到优化(增加一倍的高度)。

可以将两个或两个以上柱串联起来以增加柱高,并更真实地模拟中试规模或按比例缩减规模应用的现实条件。Further scale up can be achieved with minimal re-optimization by packing 颇尔 LRC empty glass columns.

Mixed-mode Chromatography Sorbents for Antibody Capture and “No Salt” Hydrophobic Interaction

  • MEP HyperCel sorbent:Antibody capture; alternative to conventional hydrophobic interaction
  • MEP, HEA, PPA HyperCel sorbents:No salt/low salt alternative to hydrophobic interaction
 
 

Sorbent Specifications

Volume
1 mL (5 mm ID x 50 mm)
5 mL (8 mm ID x 100 mm)

Functionalities
Mixed-mode:MEP, HEA and PPA HyperCel sorbents

Storage Solution
30% isopropanol/100 mM sodium phosphate, pH 4.3

Working Pressure1
< 0.5 barg (7 psig)

Column Specifications

Outer Dimensions
10 x 100 mm for 1 mL columns
11.5 x 140 mm for 5 mL columns

材料成分
Body and end caps:Molded polypropylene
17 µm frit:PP/PE (Polypropylene/Polyethylene)

Connections2
Built-in 10-32 fittings

最大操作压力
20 barg (290 psig) for 1 mL columns
30 barg (435 psig) for 5 mL columns

1 Pressure at 600 cm/h equivalent to 2 mL/min in 0.1 M NaCl.
2 For HPLC/MPLC/AKTA systems, direct connection with 1/16 in. tubing and 10-32 fittings.For connecting to systems with M6 or 1/4-28 fittings, consult the appropriate system manual for necessary fittings and adapters.

 

 
Mixed-mode Sorbent 配基 Average Particle Size (µm) Ligand Density (µmole/mL) Dynamic Capacity (mg/mL)1
MEP HyperCel 4-mercapto-ethyl-pyridine (pKa = 4.8) 90 80 – 125 > 202
HEA HyperCel Hexylamine (aliphatic) (pKa = 8.0) 90 58 – 84 > 403
 PPA HyperCel Phenylpropylamine (aromatic) (pKa = 8.0) 90 58 – 80 > 403
 

 

1 Determined at 10% breakthrough using:
2 5 mg/mL human IgG in PBS, flow rate 60 cm/h
3 5 mg/mL BSA in PBS, flow rate 100 cm/h
 
 

Separation of Lysozyme, α-Chymotrypsinogen, Ovalbumin and BSA on a 颇尔 PRC PPA HyperCel Prepacked Column

Column:颇尔 PRC prepacked column PPA HyperCel, 5 mm I.D. x 50 mm, volume:1 mL, linear flow rate:75 cm/h.Equilibration and wash:PBS, pH 7.4. Load:500 µL (lysozyme, α-chymotrypsinogen, ovalbumin and BSA, all at 2 mg/mL in equilibration buffer).Elution:by pH step gradient in phosphate/citrate buffer, pH 7.0 - 5.4 and 2.6.
 

颇尔 offers a comprehensive line of chromatography columns from lab to process scale.

 

 PRC 预装柱

PRC Columns
1 - 5 mL (prepacked)
Fast selectivity screening

 LRC 层析柱

LRC Columns
5 - 900 mL
Preparative and process optimization
 Resolute Columns

Resolute® Columns
6 - 300 L
Pilot and small-scale production

 Resolute Columns

Resolute Columns
50 - 1500 L
Large-scale production

 

PRC Prepacked Sorbent Ordering Information

 

 
Part Number 描述 Packaging
PRC05X050MEPHCEL01 PRC Column 5x50 MEP HyperCel 1 毫升
PRC05X050HEAHCEL01 PRC Column 5x50 HEA HyperCel 1 毫升
PRC05X050PPAHCEL01 PRC Column 5x50 PPA HyperCel 1 毫升
PRC08X100MEPHCEL01 PRC Column 8x100 MEP HyperCel 5 毫升
PRC08X100HEAHCEL01 PRC Column 8x100 HEA HyperCel 5 毫升
PRC08X100PPAHCEL01 PRC Column 8x100 PPA HyperCel 5 毫升
 

 


pall,颇尔,PRC 预装层析柱,预装 MEP、HEA 和 PPA HyperCel 混合机制层析介质
上一条pall,颇尔,PRC 预装柱,预装HyperCel STAR AX 耐盐阴离子交换层析介质,PRCSTARAX1ML, PRCSTARAX5ML
下一条pall,颇尔,PRC预装柱,预装Q和CM Ceramic HyperD 离子交换层析介质,PRC05X050QCHDF01, PRC05X050CMCHDF01

相关产品


访客留言

15900658720
18017322602