Kleenpak Nova capsules are designed for use in medium-to-large-scale production environments (100 L to > 1000 L), and are often selected by the end user following scaling studies using smaller, Kleenpak capsule formats.Kleenpak Nova capsules can be offered with 'In-line' (NP) or 'T' style (NT) inlet/outlet configurations with either sanitary flange or hose barb fittings.With the AB-style filter cartridge at their core, Kleenpak Nova filter capsules can be supplied with the most comprehensive range of filter media among all of 颇尔's single-use capsules.
特色及优点
- Built in pre-filtration layer ensures exceptionally high dirt holding capacity, long service life and smaller installations
- Absolute filtration layers for consistent performance and no fiber shedding or unloading
- High flow rates mean faster production times and improved process economics
- Positive zeta potential for the removal of fine contaminants such as bacteria, viruses, endotoxins and haze
- Broad chemical compatibility for use in a wide range of applications
- Available in T-style or In-line formats for flexibilty of use
- Staubli♦ vent valve allows for simplicity of connection to integrity test devices
- Resistant to repeat autoclave cycles
- Variable inlet and outlet connection configurations to accept variable tubing dimensions
- Quality and Bio-Safety Biological Tests
- Meets USP Biological Reactivity Test in vivo for Class VI-121 °C Plastics
Effluent Quality Tests*
- Meets Cleanliness per USP Particulates in Injectables
- Non-Fiber-Releasing Non-Pyrogenic per USP
- Bacterial Endotoxins (< 0.25 EU/mL)
- Meets Total Organic Carbon and Water Conductivity per USP Purified Water, pH per USP Sterile Purified Water
♦ Staubli is a trademark of Staubli AG
* Per lot sample soak or rinse-up flush aliquots
材料成分
| Filter Membrane | Polypropylene/Glass Fiber Dual Layer |
| Support/Drainage | 聚丙烯 |
| Core/End Caps | 聚丙烯 |
| Cage | 聚丙烯 |
| O 型圈 | 聚丙烯 |
| Sealing Technology | Thermal bonding without adhesives |
| Housing Bowl | 聚丙烯 |
| Housing Head ¹ | 聚丙烯 |
Operating Conditions
| Maximum Operating Temperature | 40 °C |
| 最大操作压力 |
3 barg (43.5 psig) at 40 °C in liquids1 0.5 barg for continuous gas service applications2 |
2 In case the pressure may exceed 0.5 barg (7 psig) during operation, a safety shield is required to protect operators and equipment in case of an accident.However, the maximum pressure of 3 barg (43.5 psig) must not be exceeded at any time
Microbial and Particulate Removal Efficiency
| Challenge Contaminant | Typical Removal Efficiency |
| Brevundimonas diminuta | TR > 102 |
| Serratia Marcesens | TR> 105 |
| Lactobacillus brevis | TR > 108 |
| Saccharomyces cerevisiae | TR > 1010 |
| Aqueous suspension of AC fine test dust ³ | β> 5000 (99.98%) at 0.5 micron |
Nominal Dimensions
| In-Line (P-style) | NP5L | NP7 | NP8 |
| Maximum diameter including valves | 154 mm (6.1 in.) | 154 mm (6.1 in.) | 154 mm (6.1 in.) |
| Length with hose barb inlet/outlet | 275 mm (10.8 in.) | 644 mm (25.4 in.) | 895 mm (35.2 in.) |
| Length with sanitary inlet/outlet | 213 mm (8.4in.) | 584 mm (23.0 in.) | 834 mm (32.8 in.) |
| T-style | NT6 | NT8 |
| Maximum diameter including valves | 240 mm (9.5 in.) | 240 mm (9.5 in.) |
| Length | 349 mm (13.7 in.) | 848 mm (33.4 in.) |
Sterilization 4
| Autoclave (Maximum) | 1 x 60 minutes at 135 °C |
| Gamma irradiation | Maximum dosage 50 kGy |
Typical Liquid Flow Rates
Please contact us for liquid flow rates.
